모든 제품
-
단발Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2 -
윌리엄Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
-
톰Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
-
LeoAstm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
Cross Hatch Cutter ISO 2409-1992, GB/T9286-98, BS 3900 E6 And ASTM D3359 Standards
무료 샘플과 쿠폰을 받으려면 연락하세요.
왓츠앱:0086 18588475571
웨이 채팅: 0086 18588475571
스카이프: sales10@aixton.com
걱정이 있으시면 24시간 온라인 서비스를 제공합니다.
x제품 상세 정보
| 강조하다 | digital thickness gauge,coating thickness meter |
||
|---|---|---|---|
제품 설명
Cross Hatch Cutter
Product Introduction:
2202 Cross Hatch Cutter is designed and manufactured according to ISO 2409-1992, GB/T9286-98, BS 3900 E6 and ASTM D3359 standards.
Introduction:
2202 Cross Hatch Cutter is designed and manufactured according to ISO 2409-1992, GB/T9286-98, BS 3900 E6 and ASTM D3359 standards.
Technical Specification:
| Cutting Head No. | Gap(mm) | Blades | Cutters Edges | Coating Thickness(µm) |
| 2202/1 | 1 | 6 | 8 | 0~60 |
| 2202/2 | 1 | 11 | 8 | 0~60 |
| 2202/3 | 1.5 | 6 | 8 | 0~60 |
| 2202/4 | 2 | 6 | 8 | 61~120 |
| 2202/6 | 3 | 6 | 8 | 121~250 |
Order Information :
| Standard Kit | Contain |
| 2202/1C | Cross Hatch Cutter + Carry Case + Hexagonal Screwdriver + Brush + Magnifier + Tape |
| 2202/2C | |
| 2202/3C | |
| 2202/4C | |
| 2202/6C | |
| Simple Kit | Contain |
| 2202/1S | Cross Hatch Cutter + Paper Box + Hexagonal Screwdriver |
| 2202/2S | |
| 2202/3S | |
| 2202/4S | |
| 2202/6S |
Evaluation Criteria of Coating Adhesion Test:
Evaluation according to scale below:
| Description | Performance | Class(ASTM) | Class(ISO) |
| The edges of the cuts are completely smooth; none of the squares of the lattice is detached | 5B | 0 | |
| Detachment of small flakes of the coating at the intersections of cuts. A cross-cut area not significantly greater than 5% is affected | |
4B | 1 |
| The coating has flaked along the edges and/or at the intersections of the cuts. A cut area significantly greater than 5%, but not significantly greater than 15% is affected | |
3B | 2 |
| The coating has flaked along the edges of the cuts partly or wholly in large ribbons, and or it has flaked partly or wholly on different parts of the squares. A cross cut area significant greater than 35% is affected | |
2B | 3 |
| The coating has flaked along the edges of the cuts in large ribbons and/or same square have detached parity or wholly. A cross-cut area significantly greater than 35%, but not significantly greater than 60% is affected | |
1B | 4 |
| Any degree of flaking that cannot even be classified | 0B | 5 |
추천된 제품