모든 제품
-
단발Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2 -
윌리엄Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
-
톰Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
-
LeoAstm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
19mm Thickness Duplex Asme Ut Calibration Block
무료 샘플과 쿠폰을 받으려면 연락하세요.
왓츠앱:0086 18588475571
웨이 채팅: 0086 18588475571
스카이프: sales10@aixton.com
걱정이 있으시면 24시간 온라인 서비스를 제공합니다.
x제품 상세 정보
| 소재 | 탄소강, 스테인리스강, 듀플렉스 스테인리스강 2205, 알루미늄 7075 | 두께 | 19mm/38mm/75mm/125mm |
|---|---|---|---|
| 구멍 직경 | 2.5mm/3/5.5/6.5 | 교정 인증서 | 포함 |
| 사건 | 포함 | OEM | 그래요 |
| 제품 이름 | ASME 초음파 교정 블록 | ||
| 강조하다 | duplex Asme Ut Calibration Block,duplex Ut Calibration Block,19mm Asme Ut Calibration Block |
||
제품 설명
ASME ultrasonic Calibration Blocks Ultrasonic calibration blocks ultrasonic calibration blocks uk
ASME calibration block (non pipe)
Standard: ASME BPVC-V-2015
The size and shape of ASME non-pipe weld test block are shown in the chart below, when inspected
For inspection on materials with surface diameter greater than 500mm, test blocks with the same curvature as the workpiece or standard test blocks with a diameter equal to or less than 500mm can be used
During the upper inspection, the curve test block, namely the tube seam test block, should be used.
1. The distance between each slot and either end of the test block or other slots is not less than T or 25mm, if larger.
2. The minimum length L of the test block shall be 200mm or 8T, if larger.
3. When the inner diameter is equal to or less than 100mm, the minimum radian is 270°. When the inner diameter is greater than 100mm, the minimum arc length is 200mm or 3T, and the larger is taken
4. The depth of each tank is 11% T≥h≥ 8% T, width ≤6mm, length ≥225mm
ASME calibration block (non pipe)
Standard: ASME BPVC-V-2015
The size and shape of ASME non-pipe weld test block are shown in the chart below, when inspected
For inspection on materials with surface diameter greater than 500mm, test blocks with the same curvature as the workpiece or standard test blocks with a diameter equal to or less than 500mm can be used
During the upper inspection, the curve test block, namely the tube seam test block, should be used.
1. The distance between each slot and either end of the test block or other slots is not less than T or 25mm, if larger.
2. The minimum length L of the test block shall be 200mm or 8T, if larger.
3. When the inner diameter is equal to or less than 100mm, the minimum radian is 270°. When the inner diameter is greater than 100mm, the minimum arc length is 200mm or 3T, and the larger is taken
4. The depth of each tank is 11% T≥h≥ 8% T, width ≤6mm, length ≥225mm
Material: carbon steel 1018, stainless steel 304/316, duplex stainless steel 2205,aluminum 7075
Hole diameter:2.5/3/5.5/6.5mm
Thickness: 19mm/38mm/75mm/125mm
Mark: OEM can be done
HUATEC Group offer all kinds ultrasonic calibration block
추천된 제품