모든 제품
-
단발Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2 -
윌리엄Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
-
톰Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
-
LeoAstm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
Measure Ultra-Thin Workpieces Down To 0.15mm Two Points Ut Thickness Meter
무료 샘플과 쿠폰을 받으려면 연락하세요.
왓츠앱:0086 18588475571
웨이 채팅: 0086 18588475571
스카이프: sales10@aixton.com
걱정이 있으시면 24시간 온라인 서비스를 제공합니다.
x제품 상세 정보
| 크리스털 | 단일 요소 | 결의 | 0.001 밀리미터 |
|---|---|---|---|
| 소재 | ABS | 제품 이름 | Ut 두께 측정기 |
| 무게 | 배터리 포함 210g | 측정 범위(강철용) | 인터페이스 에코 모드: 1.50mm– 20.0mm, 에코 에코 모드: 0.3-10.0mm |
| 정확성 | ±0.005mm 또는 0.0002인치(두께 < 3mm인 경우), ±0.05mm 또는 0.002인치(두께 < 20mm인 경우) | 표시 | EI 백라이트 및 대비 조절이 가능한 42×57mm LCD 크기, 글꼴 크기 최대 13.75mm(0.54인치) |
| 크기 | 2.9 W x 5.9 H x 1.26 D 인치 (73 W x 149 H x 32 D mm) | 통신 포트 | USB 포트 또는 직렬 RS 232 포트(옵션) |
제품 설명
Measure Ultra-Thin Workpieces Down To 0.15mm Two Points Ut Thickness Meter
TG-3230 is a simple to use, hand-held UT thickness meter for high precision, high resolution and ultra thin thickness measurement.
It uses nowadays the most advanced microprocessor and ultrasonic technology to offer users many outstanding features.
It presents highly stable and repeatable reading, high accuracy and resolution( up to 0.001mm or 0.0001inch ) and ability for measuring ultra thin sample ( as low as 0.20mm or 0.008inch).
It also offers a compact, comfortable and durable structure, ease of operation through the menu, multiple language selection, low power consumption ( with two dry or optional rechargeable AA batteries).
These features along with its high quality probe make TG-3230 unequalled in its performance as well as its value!
MAIN FEATURES
* Very high accuracy and resolution: up to 0.001mm or 0.0001 inch
* Measure ultra thin sample as low as 0.20mm or 0.008 inch
* Display units:Imperlal and metric
* Automatic self calibration
* Couplant indicator
* Automatic power off function
* High-low limit alarm function
* Lcd brightness adjust function
* Low battery indictor function
TECHNICAL SPECIFICATIONS
|
Measuring Range (for steel) |
Interface-Echo Mode: (I-E or Standard Mode) |
1.50mm– 20.0mm (0.059in – 0.787 in) |
|
Echo-Echo Mode: (E-E or High Precision Mode) |
0.2mm– 10.0mm (0.006in – 0.394in) |
|
|
Measuring Accuracy |
±0.005mm or 0.0002 inch (if thickness < 3mm) |
|
|
±0.05mm or 0.002 inch (if thickness < 20mm) |
||
|
Display Resolution |
mm : 0.1 / 0.01 / 0.001 |
|
|
inch : 0.01 / 0.001 / 0.0001 |
||
|
Sound Velocity Range |
1000 to 9999 m/sec (0.0394 – 0.3936 inch/ms) |
|
|
Measuring Refresh Frequency |
4Hz in normal mode, up to 25Hz |
|
|
Memory Capacity |
500 test values |
|
|
Multiple Calibrations |
One point or Two Point |
|
|
Display LCD |
42×57mm LCD size with EI backlight and adjustable contrast, font size up to 13.75mm (0.54 inch) |
|
|
Power Source |
2 pcs. 1.5v AA size batteries |
|
|
Continuous working period |
About 200 hours (with backlight off) |
|
|
Power off |
Auto power off if idle for 4 minutes |
|
|
Operating Temperature |
-10 °Cto +50 °C |
|
|
Unit Size |
2.9 W x 5.9 H x 1.26 D inches (73 W x 149 H x 32 D mm). |
|
|
Weight |
200g
|
|
MEASURING PROCESS
If the word-piece is not steel or other iron-based materials, make sure to input correct sound velocity value for the sample to be tested.
Put some proper coupling paste on the work-piece, then place the probe on the surface of the sample with some press force. The thickness value will display on LCD screen in either mm or inch. The gauge shows the measuring result whenever the probe is coupled with the work-piece for longer than 2 seconds with coupling paste.
STANDARD DELIVERY
- Ultrasonic Thickness Gauge TG3230 Main unit with Calibration block (4.00 mm)
- Precision Probe (D15A) with Replaceable Delay Tip, see photo below
- Coupling Paste
- Operation Manual and Calibration Certificate
- Consumer-Type 2 AA Type Alkaline Battery (3 Volt)
- Carrying Case
추천된 제품