모든 제품
-
단발Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2 -
윌리엄Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
-
톰Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
-
LeoAstm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
Laboratory And On Site Portable Shaker Vibration Calibrator Handheld
무료 샘플과 쿠폰을 받으려면 연락하세요.
왓츠앱:0086 18588475571
웨이 채팅: 0086 18588475571
스카이프: sales10@aixton.com
걱정이 있으시면 24시간 온라인 서비스를 제공합니다.
x제품 상세 정보
| 색상 | 검은색 | 표준에 부합하다 | ISO10816 |
|---|---|---|---|
| 크기 정확도 | 가속도(@10m/s2 pk), 40Hz~320Hz + 0.3dB + 1digit, 20Hz~640Hz + 0.5dB +1digit 속도(@20mm/sec rms), 40Hz~320 | 기계 크기 | 300x250x210(mm) |
| 순중량 | 6kgs | 작동 온도 | 0~50 감소 |
| 힘 | 220Vac(110Vac 옵션) | 제품 이름 | 진동 셰이커 |
| 브랜드 | 후아테크 | ||
| 강조하다 | laboratory portable shaker vibration calibrator,portable shaker vibration calibrator handheld,on site portable vibration calibrator |
||
제품 설명
Laboratory And On Site Portable Handheld Shaker For Vibration Calibration Of Vibration Meters Handheld
The parameters and units of HG5026 Vibration Calibrator are defined as following:
Acceleration (m/s2 ): PEAK
Velocity (mm/s ): RMS
Displacement (μm): PK- PK
HUATEC HG5026 vibration calibrator can be used to calibrate vibration accelerometer, velocity and proximity transducer and also a vibration measuring instrument.
Standard sine signal vibration at any frequency from 1 to 1280 Hz can be defined in the calibrator.
The amplitude of the acceleration, velocity and displacement, can be defined through potentiometers and shown on digital displays.
Either horizontal or vertical vibration can be generated.
HUATEC HG5026 combines sine signal generator, power amplifier, standard transducer, vibration meter and a shaker in one and features a small volume, high accuracy and easy operation.
HUATEC HG5026 can be used either in laboratory or on site.
Keypad introduction
1 Vibration amplitude display
Showing the amplitude of the vibration
2 Calibration potentiometer Designed for calibrating this calibrator by comparing the reading of an accurate vibration meter and the display of this device. Put function selecting switch to ACC, then use a screwdriver to adjust the display to make it the same as that accurate vibration meter. Then adjust VEL & DISP the same way.
3 Parameter selecting switch Select display parameter of the calibrator
4 Adjusting the vibration amplitude
5 Adjusting the vibration amplitude slowly
6 The vibration head for fixing a transducer to be calibrated
7 The tapped hole for fixing the stand of proximity probe
For the calibration of proximity probe.
8 Power switch
9 Socket for 220 V AC power input cable
10. Socket for vibration output
For monitoring the wave shape/ distortion of the vibration
11 Output socket of –24 V voltage
Providing power – 24Vdc for calibration of proximity probe.
12 Frequency adjustment
Press for selecting the digital position, Rotate to change value
13 Vibration frequency display
Specifications
Frequency: from 1 to 1280 Hz,adjustable
Amplitude accuracy:
Acceleration (@10m/s2 pk) 40Hz to 320Hz + 0.3dB + 1digit
20Hz to 640Hz + 0.5dB +1digit
Velocity (@20mm/sec rms) 40Hz to 320Hz +0.5dB +1digit
Displacement (@50μm pk-pk) 40Hz to 320Hz + 0.5dB + 1digit
Proximity probe linearity calibration kits
Probe: 5mm and 8mm probes Range: 0~2.0mm
Display: 3 1/2 digit display for vibration and frequency
Size: 300 x250 x210(mm)
Weight: 6kgs
Temperature: Operation: 0oC to 50 oC
Storage: -20 oC to 70 oC
Humidity: 90% non -condensing
Maximum vibration amplitude & transducer weight
|
Wt
Freq |
<100g | <250g | <500g | ||||||
| a(m/S2) | v(mm/S) | d(μm) | a(m/S2) | v(mm/S) | d(μm) | a(m/S2) | v(mm/S) | d(μm) | |
| 10Hz | 2.5 | 28 | 1300 | 3.5 | 40 | 1800 | 4 | 45 | 2000 |
| 20Hz | 15 | 85 | 1900 | 10 | 60 | 1300 | 5 | 28 | 640 |
| 40Hz | 60 | 170 | 2000 | 35 | 100 | 1100 | 12 | 35 | 380 |
| 80Hz | 100 | 141 | 800 | 40 | 60 | 320 | 14 | 20 | 110 |
| 160Hz | 75 | 53 | 150 | 35 | 25 | 70 | 12 | 8.5 | 24 |
| 320Hz | 50 | 18 | 25 | 30 | 10 | 15 | 10 | 3.5 | 5 |
| 640Hz | 30 | 5 | 3 | 20 | 3.5 | 2 | 6 | 1 | * |
| 1280Hz | 23 | 2 | * | 10 | 0.9 | * | 5 | 0.4 | * |
Note: With higher frequency the value of the displacement of vibration is very small so there will be no vibration signal output from the calibrator.
We also offer vibration calibration system for more high accuracy as below photo:
추천된 제품