-
단발Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
-
윌리엄Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
-
톰Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
-
LeoAstm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
Integrated IP65 Vibration Meter Switch Vibration Transducer Output 0-5v

무료 샘플과 쿠폰을 받으려면 연락하세요.
왓츠앱:0086 18588475571
웨이 채팅: 0086 18588475571
스카이프: sales10@aixton.com
걱정이 있으시면 24시간 온라인 서비스를 제공합니다.
x가로 감도 | <5> | 측정 매개변수 | 속도 또는 가속도, 가상값 또는 가속도 피크값 |
---|---|---|---|
진동값 전압 출력 | 0-5V | 경보 레벨 | 2 |
경보 출력부 | 각 레벨의 릴레이 터치 스팟(일반적으로 열림 또는 닫힘 선택 가능) | 등급을 보호하세요 | IP65 |
강조하다 | portable vibration meter,digital vibration meter |
Integrated IP65 Vibration Meter Switch Vibration Transducer Output 0-5v
Overview
Integrated vibration switch, it is design to integrated by acceleration sensor, integrator,transduce and relay. Output 0-5V vibratory acceleration peak value or effective speed, and corresponding to the two touch spots of II level alarm.
Integrated vibration switch is easy to install,it is use together with panel meter, DCS, PLC etc. monitoring system of spot.
Technique specification
1. Transverse sensitivity: <5%
2. Shell electrical isolation
3. Measure parameter: velocity or acceleration, virtual value or acceleration peak value
4. Measure range optional: Max 180 ms-2 Or200mm/s
5. Vibrating value voltage outpute: 0-5V
6. Frequency Response:
10-1000Hz(velocity,5% accuracy)
1-1000 Hz(acceleration,5% accuracy)
7. Working tempreture (℃): -20~70;
8. Power supply: 24Vdc;
9. Alarm level: 2
10. Alarm output: relay touch spot on each level(normally open or close optional)
11. alarm value adjustable
12. Cable socket Model:(SY)X12KX3P
13. Case material: aluminum, sealed
14. Extraction: sideway
15. Protect grade: IP65
16. Sensor install: M8 x 1
17. size:Ф40 x 80 mm
18. weight: 250g
Connection method
Attention
- Sensor and the object that under test should be closely connected. surface should be smooth, Sensor is installed by washer
- For prevent loose and water vapor entrance, after the cable socket and sensor socket tighten could smear silicon rubber
- For avoid the interference from earth wire, terminals of the transducer and the case is isolated. Please notice don’t shot out