모든 제품
  • HUATEC GROUP CORPORATION
    단발
    Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
  • HUATEC GROUP CORPORATION
    윌리엄
    Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
  • HUATEC GROUP CORPORATION
    톰
    Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
  • HUATEC GROUP CORPORATION
    Leo
    Astm E114-15 인치 타입 1018 보정 시험 블록 탄소강 작은 이이더블유 2
담당자 : Noah
전화 번호 : +8613911115555
왓츠앱 : +8613910983110

HG5003 Vibration Calibrator Vibration Meter Measuring Instruments

  • HG5003 Vibration Calibrator Vibration Meter Measuring Instruments
  • HG5003 Vibration Calibrator Vibration Meter Measuring Instruments
  • HG5003 Vibration Calibrator Vibration Meter Measuring Instruments
원래 장소 베이징
브랜드 이름 HUATEC
인증 ISO, CE, GOST
모델 번호 HG5003
최소 주문 수량 1pcs
포장 세부 사항 표준 수출 패키지
배달 시간 1-4days
지불 조건 전신환, 페이팔, 웨스턴 유니온
공급 능력 달 당 500 PC

무료 샘플과 쿠폰을 받으려면 연락하세요.

왓츠앱:0086 18588475571

웨이 채팅: 0086 18588475571

스카이프: sales10@aixton.com

걱정이 있으시면 24시간 온라인 서비스를 제공합니다.

x
제품 상세 정보
정확성 5% 가속도 진폭(RMS) 9.81m/s2（1g）±3%
출력 파형 사인파형 파형 왜곡 5%
최대 부하 120Gram 작업 온도 0~55도
강조하다

portable vibration meter

,

digital vibration meter
메시지를 남겨주세요
제품 설명

 

HG5003 Vibration Calibratorcan be used to calibrate small vibration transducers and also vibration measuring instruments

 

 

HG5003 Vibration Calibrator

HG5003 Vibration Calibrator Vibration Meter Measuring Instruments 0

General Description

HG5003 Vibration Calibrator can be used to calibrate small vibration transducers and also vibration measuring instruments and vibration monitoring systems quickly. Standard sine signals with fixed frequency 159.2Hz and fixed amplitude is generated from the calibrator.

HG5003 Vibration Calibrator combines sine signal generator, power amplifier, standard transducer and shaker in one and features a smaller volume, high accuracy and easy operation. It can be used either in laboratory or on site.

Specifications

  • Accuracy: 5%
  • Acceleration Amplitude(RMS):9.81m/s2(1g)±3%
  • Velocity Amplitude (RMS):9.81mm/s±3%
  • Displacement Amplitude (RMS):9.81µm±3%
  • Vibration Frequency:159.2Hz±0.5%
  • Output waveform: Sine waveform
  • Waveform distortion:£5%
  • Maximum Load: 120Gram
  • Battery: 9V rechargeable, Need 15 hours for fully charge
  • Can make the device work for 1.5 hours
  • Automatic power off time: 50seconds.
  • Working temperature: 0-55 oC
  • Size:Φ52×160mm
  • Weight: 600 gram (with batteries)
  • Tapped hole for sensor installation: M5 x 30mm

Operation

 


1

Fix M5 screw, accelerometer on the shaker table of the calibrator

 

2

Press the only switch at the calibrator to start the vibration.

 

3

Compare the reading of your vibration meter before the shaker power off after 50sec.

 

4

The LED will turn from GREEN to ORANGE when battery low. It means you need to recharge the battery for 15 hours.

꼬리표:

휴대용 진동계

디지털 진동측정기